Product Overview

LVT Dry Back and glue-down vinyl refer to the same product — each plank is bonded directly to the subfloor with adhesive. Unlike click systems, there is no mechanical joint between planks, so the floor forms a continuous surface with no gaps or movement. This is the main reason dry back is preferred in commercial environments where a seamless finish matters. Installation takes longer than click flooring because the adhesive must be applied and the planks pressed into place, and the subfloor needs to be clean, flat, and dry before installation. However, once installed, the bond is permanent and highly stable. The floor does not shift, separate, or lift under normal use, even in areas with heavy foot traffic, rolling loads, or temperature variation. Because dry back planks are thinner than click planks and do not require a locking profile, material cost is lower and more square meters fit into each container. This makes dry back a more economical choice for large commercial and residential projects — hotels, offices, retail spaces, and multi-unit residential developments — where cost per square meter and installation efficiency are key considerations. MGT® LVT Dry Back is available in a wide range of wood, stone, and abstract patterns, with wear layer options typically ranging from 0.1 mm for light residential use to 0.5 mm or higher for commercial applications. It is compatible with underfloor heating and, once installed, requires only regular sweeping and occasional damp mopping — no waxing or sealing needed.

Suitable Applications